Press and move to zoom.
Mouse over image to zoom.

1 / 2 X 100 FT Grade 80 Alloy Chain - USA

Product Code:18S500-0100

1/2" Alloy Chain
  • Grade 80 Self Colored
  • Working Load Limit:12,000 lbs
  • Proof tested
  • Specifically Designed for Overhead Lifting
  • 100 ft/drum
  • Priced per/ drum
  • Weight 2.50 lbs/ft
Code Size All Types Other(s) Quantity
18S500-0100 1/2 Alloy
  • Pack: Half Drum
Grade 80 Alloy Chain- a heat-treated steel chain with a high strength to weight ratio. The chain's strength makes it safe for overhead lifting and lifting slings. It's also excellent for uses such as recovery, safety, and towing chains. Use only Grade 80 Alloy Chain and fittings for overhead lifting.

Made to NACM Specifications

NACM Grade 80

Alloy Chain

A- Wire Diameter .512"
B- Inside Length (Max.)   1.64"
C- Inside Width Range 0.688"-0.768"

Working Load Limit is the maximum working load which should ever be applied to the product under any condition.

Never exceed WLL of the chain.

Inspect regularly. All chain and chain attachments should be inspected regularly for visible damage, distortion, elongation, corrosion and wear that can cause breakage or reduce strength.

Attachments should have a Working Load Limit at least equal to the chain with which they are used.

Avoid shock loads.

Not for overhead lifting. Use only Grade 80 Alloy Chain for overhead lifting. Proof Coil Chain, High Test Chain, and Grade 70 Transport Chains are not to be used for overhead lifting.

Eliminate all twists and kinks in chain before using.

All dimensions are nominal and all weights are approximate.

You may also be interested in