Products
Grade 43 High Test Chain - 3/8 in
Grade 40 High Test Chain (also known as Grade 43) offers greater strength and wear resistance than general utility chain. Not calibrated for windlass anchor systems, pocket wheels, or chain hoists. Manufactured to NACM specifications
Product Specifications
Finish
- Hot Dip Galvanized
- Self Colored
Chain Type
Grade 43 High Test
Size
3/8 in
WLL
5400 lbs
Additional Product Info
Other Specifications
| A) Wire Diameter: | 0.406″ |
| B) Inside Length (Max.): | 1.38″ |
| C) Inside Width (Min.): | 0.55″ |
| Overhead Lifting: | False, Do Not Use For Overhead Lifting |
| Proof Tested: | True |
| General Purpose Chain: | True |
Safety Notice
Grade 43 high test chain is designed for load securement and general-purpose applications but is not approved for overhead lifting. Before each use, inspect the chain for wear, distortion, cracks, or corrosion. Always use appropriate fittings and never exceed the working load limit. Avoid shock loading or side pulling. Using this chain outside of its intended purpose or beyond rated capacity can result in serious injury or equipment failure.
Product Downloads
