Press and move to zoom.
Mouse over image to zoom.

Chicago Grip for High Strength Cables, Messenger,Guy Strand .218'' to .550''

Product Code:CP1692-5

Chicago® Grip - for Extra-High-Strength Cables, Messenger, Guy Strand.

Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable

Code All Types Quantity
CP1692-5 Cable Pullers  
Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. Designed for cable sizes from .218'' (5.54 mm) to 0.550'' (13.97 mm). When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip.
Product: CP1692-5
Brand: Klein Tools
Type: Cable Puller

Approx. Weight Each :

6.40 lbs. (2.9 kg)
Jaw Length: 5" (127 mm)
Maximum Cable: .55"
Maximum Safe Load-kg: 3629 kg
Maximum Safe Load-lbs.: 8000 lbs.
Minimum Cable: .218"
Sub Brand: Chicago Grip

Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.

When used on/near energized lines, ground, insulate, or isolate grip before pulling.

Do not exceed rated capacity.

Always match proper size and type of grip to application.

Grips are to be used for temporary installation, not for permanent anchorage.