Klein Chicago Grip For Bare Wire .08'' (2 mm) to .20'' (5.1 mm)
Chicago® Grip - for Bare.
WireSingle ''V'' groove jaw.
Klein Tools' 1613 Series Bare Wire Chicago Grips are designed to work with solid and stranded bare wire from .08'' (2 mm) to .20'' (5.1 mm). All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function.
Designed for working with solid and stranded bare wire from .08'' (2 mm) to .20'' (5.1 mm).
Approx Weight Each :
|1.50 lbs. (0.7 kg)|
|Jaw Length:||3" (76 mm)|
|Maximum Cable:||4 B&S solid .20"|
|Maximum Safe Load-kg:||680 kg|
|Maximum Safe Load-lbs.:||1500 lbs.|
|Minimum Cable:||12 B&S solid .08"|
|Sub Brand:||Chicago Grip|
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Grips are to be used for temporary installation, not for permanent anchorage.